Forum
Raspberry Pi systemd eth0 wlan0 bridge (Netzwerktechnik)
Ich habe das ganze jetzt nochmal neu gemacht.
Bin komplett wie in der Anleitung alles nach und nach durchgegangen.
Die WLANBridge wir mir am Handy angezeigt aber es kommt zu einem Authentifizierungsproblem.
brctl show sieht wie folgt aus:
bridge name-------bridge id------------------- STP enabled--------interfaces
br0 ------------------8000.74da383a05a5----------no------------------wlan0
Es fehlt das Interface eth0.
Anbei meine Configs.
/etc/systemd/network/eth0.network
[Match]
Name=eth0
[Network]
Address=192.168.7.13/24
Gateway=192.168.7.1
DNS=192.168.7.1
/etc/network/interfaces
auto lo
iface lo inet loopback
iface eth0 inet manual
allow-hotplug wlan0
iface wlan0 inet manual
wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
allow-hotplug wlan1
iface wlan1 inet manual
wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
# Netzwerkbruecke
auto br0
iface br0 inet manual
bridge_ports eth0 wlan0 # build bridge
bridge_fd 0 # no forwarding delay
bridge_stp off # disable Spanning Tree Protocol
Mit dem Raspi kann ich ohne Probleme einen Ping auf Google absetzen.
Somit habe ich eine Verbindung ins Internet.
Bin über Hilfe dankbar!
Gesamter Thread: